Saral, D., & Köse, E., (2024).
Academic Studies on Fishing Vessels in Turkey
Ocean Engineering, vol.308, 1-17.
https://doi.org/10.1016/j.oceaneng.2024.118295
Pehlivan, E. F., & Altın, İ., (2024).
Exergy Analysis Under Consideration of Operational Parameters by Numerical Approach in A Two-Stroke Marine Diesel Engine
Fuel, vol.368.
https://doi.org/10.1016/j.fuel.2024.131650
Erkurtulmuş, S. A., & Peşman, E., (2024).
GIS-Based Floating Offshore Wind Turbine Installation Site Selection Using Fuzzy Analytic Hierarchy Process in Northeast Aegean Sea
Brodogradnja, vol.75, no.2, 1-21.
https://doi.org/10.21278/brod75204
Pesman, E., Copuroglu, H. İ., & Katayama, T., (2024).
The Effect of a Ship's Acceleration and Deceleration on Parametric Roll Motion In Regular Head Waves At Resonance Conditions
Ocean Engineering, vol.291.
https://doi.org/10.1016/j.oceaneng.2023.116367
Saraç, B., Demirtaş, C., & Ayhan, T., (2024).
Thermodynamic Analysis of Drying Cycles Utilizing A Desiccant Wheel Thermoelectric Modules And Heat Pipe For The Drying Of Hazel Nuts In The East Blacksea Climatic Conditions
Journal of Thermal Analysis and Calorimetry, vol.1, no.1, 1-2.
https://doi.org/10.1007/s10973-024-13059-x
Saraç, B., Aksu, E., Demirtaş, C., & Ayhan, T., (2024).
Free Convection Heat Transfer and Buoyancy-Assisted Flow Over A Heated Plate Inserted Horizontally In A Vertical Channel With Time-Varying Conditions
Journal of Thermal Analysis and Calorimetry, vol.149, no.5, 2255-2271.
https://doi.org/10.1007/s10973-023-12649-5
Çolak, K., Ölmez, H., & Saraç, B., (2024).
Waste Heat Recovery Assessment of Triple Heat-Exchanger Usage for Ship Main Engine Pre-Heating and Freshwater Generation Systems
Proceedings Of the Institution of Mechanical Engineers Part M-Journal of Engineering for The Maritime Environment, vol.238, no.1, 209-230.
Saral, D., & Köse, E., (2023).
A Non-Dimensional Offset Table for The Black Sea Type Fishing Vessels
Applied Ocean Research, vol.139.
https://doi.org/10.1016/j.apor.2023.103705
Şener, M. Z., Yoon, H. K., Nguyen, T. T. D., Park, J., & Köse, E., (2023).
An Experimental Study on Capacitive and Ultrasonic Measurement Principles and Uncertainty Assessment in Laboratory Wave Measurements
Ocean Engineering, vol.285.
https://doi.org/10.1016/j.oceaneng.2023.115320
Şahin, Ö. S., Kahramanoglu, E., Çakici, F., & Peşman, E., (2023).
Control Of Dynamic Trim for Planing Vessels with Interceptors in Terms of Comfort and Minimum Drag
Brodogradnja, vol.74, no.1, 1-17.
https://doi.org/10.21278/brod74101
Tuti, M., Şahin, Z., & Durgun, O., (2023).
Experimental Investigation of The Effects of Water Addition into The Intake Air on Combustion Parameters, Energy Balance And Developing An Empirical Combustion Duration Relation In Automobile Diesel Engine
Journal of Thermal Science and Technology, vol.43, no.2, 217-232.
https://doi.org/10.47480/isibted.1391437
Okur, O., Küçük, H., & Midilli, A., (2023).
Triple-Effect New Generation Drying Technique.
Innovative Food Science and Emerging Technologies, vol.89.
https://doi.org/10.1016/j.ifset.2023.103489
Midilli, A., & Kucuk, H., (2023).
Development Of a New Curve Equation Representing Thin Layer Drying Process
Energy Sources Part A-Recovery Utilization and Environmental Effects, vol.45, no.4, 9717-9730.
Ugurlu, O., Köse, E., Başar, E., Özkök, M., & Wang, J., (2022).
Simulation Modelling of Chief Officers' Working Hours on Short Sea Shipping
Ships And Offshore Structures, Vol.17, No.6, 1312-1320.
https://doi.org/10.1080/17445302.2021.1912457
Türk, A., Gürgen, S., Özkök, M., & Altın, İ., (2022).
A Comprehensive Investigation into The Performance of Genetic Algorithm for Effective Shipyard Topological Layout
Proceedings Of the Institution of Mechanical Engineers Part M-Journal of Engineering for The Maritime Environment, vol.236, no.3, 726-740.
https://doi.org/10.1177/14750902211062057
Köse, S., Sekban, D. M., & Özkök, M., (2022).
Determination Of Port-Induced Exhaust Gas Emission Amounts and Investigation of Environmental Impact by Creating Emission Maps: Sample of Trabzon Port
International Journal of Sustainable Transportation, vol.16, no.3, 258-268.
https://doi.org/10.1080/15568318.2020.1871130
Gürgen, S., & Altin, İ., (2022).
Novel Decision-Making Strategy for Working Fluid Selection in Organic Rankine Cycle: A Case Study for Waste Heat Recovery of a Marine Diesel Engine
Energy, vol.252.
https://doi.org/10.1016/j.energy.2022.124023
Gürgen, S., Kahraman, H. T., Aras, S., & Altın, İ., (2022).
A Comprehensive Performance Analysis of Meta-Heuristic Optimization Techniques for Effective Organic Rankine Cycle Design
Applied Thermal Engineering, vol.213.
https://doi.org/10.1016/j.applthermaleng.2022.118687
Çopuroğlu, H. İ., & Peşman, E., (2022).
Ship Staff Wind Comfort and Wind Safety in The Walkways of Containerships and Case Study For A Feeder Containership
Ships And Offshore Structures, vol.17, no.4, 920-938.
https://doi.org/10.1080/17445302.2021.1979724
Şener, M. Z., & Aksu, E., (2022).
The Effects of Head Form on Resistance Performance and Flow Characteristics for A Streamlined AUV Hull Design
Ocean Engineering, vol.257, 1-13.
https://doi.org/10.1016/j.oceaneng.2022.111630
Şener, M. Z., & Aksu, E., (2022).
The Numerical Investigation of The Rotation Speed and Reynolds Number Variations of A NACA 0012 Airfoil
Ocean Engineering, vol.249.
https://doi.org/10.1016/j.oceaneng.2022.110899
Midilli, A., Küçük, H., Hacıosmanoğlu, M., Akbulut, U., & Dincer, İ., (2022).
A Review on Converting Plastic Wastes into Clean Hydrogen Via Gasification for Better Sustainability
International Journal of Energy Research, vol.46, no.4, 4001-4032.
Türk, A., Saral, D., Özkök, M., & Köse, E., (2021).
Minimization Of Total Trim Loss Occurring in Pipe Cutting in Shipbuilding with Genetic Algorithm
Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment, vol.235, 695-704.
https://doi.org/10.1177/1475090221991693
Ünver, B., Altin, İ., & Gürgen, S., (2021).
Risk Ranking of Maintenance Activities in A Two-Stroke Marine Diesel Engine Via Fuzzy AHP Method
Applied Ocean Research, vol.111.
https://doi.org/10.1016/j.apor.2021.102648
Nacak, C., & Saraç, B., (2021).
The Performance Assessment of a Refrigeration System Which Exists on A Cargo Vessel Influenced by Seawater-Intake Temperature
Journal Of Thermal Analysis and Calorimetry, vol.146, no.3, 1229-1243.
https://doi.org/10.1007/s10973-020-10060-y
Saraç, B., (2021).
Application Of Advanced Exergy Method to The Vapour Compression Cooling Test Unit
Journal Of Thermal Science and Technology, vol.41, no.1, 157-166.
https://doi.org/10.47480/isibted.979394
Özmen, Y., Aksu, E., & Gürsel Özmen, N., (2021).
Experimental and Numerical Investigation of Effects of Different Cavity Geometries on Flow in A Rectangular Channel
Journal Of the Faculty of Engineering and Architecture of Gazi University, vol.36, no.2, 627-640.
https://doi.org/10.17341/gazimmfd.569773
Midilli, A., Küçük, H., Topal, M. E., Akbulut, U., & Dincer, İ., (2021).
A Comprehensive Review on Hydrogen Production from Coal Gasification: Challenges and Opportunities
International Journal of Hydrogen Energy, vol.46, no.50, 25385-25412.
Türk, A., & Özkök, M., (2020).
Shipyard Location Selection Based on Fuzzy AHP and TOPSIS
Journal Of Intelligent & Fuzzy Systems, vol.39, no.3, 4557-4576.
https://doi.org/10.3233/JIFS-200522
Kolukisa, D. C., Ozbulut, M., Peşman, E., & Yildiz, M., (2020).
Development Of Computationally Efficient Augmented Lagrangian SPH for Incompressible Flows and Its Quantitative Comparison with WCSPH Simulating Flow Past a Circular Cylinder
International Journal for Numerical Methods in Engineering, vol.121, no.18, 4187-4207.
https://doi.org/10.1002/nme.6436
Kara, G., & Pürçek, G., (2020).
Characterization Of Boride Layer Formed on Ti-6Al-4V Alloy by Electron Beam Evaporation Technique
Physics Of Metals and Metallography, vol.121, no.14, 1466-1472.
https://doi.org/10.1134/S0031918X20140100
Kara, G., & Pürçek, G., (2020).
Mechanical Properties and Cell Proliferation Response of Borided Biomedical Titanium Alloys with Different Crystalline Structures
Surface & Coatings Technology, vol.397.
https://doi.org/10.1016/j.surfcoat.2020.126051
Midilli, A., Küçük, H., & Akbulut, U., (2020).
Thermodynamic Based Environmental and Sustainability Assessments of Gas Flow in A Curved Annular Channel
International Journal of Hydrogen Energy, vol.45, no.49, 26379-26386.